Getting the Perfect Fit: Professional Tips to Measure a New Door Properly

Replacing your old door is a good way to give your home some upgrade. In terms of functionality, security, and appearance, a well-chosen door can transform your house. However, there is one thing that shouldn’t be underestimated when choosing your perfect door – precise measurements.

If you are planning to replace an old door or purchase a new one, accurate measurements will help you pick the right one. Follow these professional tips and you won’t make mistakes measuring a new door.

Measure Door Width Accurately

The first thing that you need to do is measure the door width correctly. If you replace an existing door, measure its width horizontally, from one side to another. Make sure to get three measurements, from the top, middle and bottom of the door. It doesn’t necessarily mean that all three measurements will be equal. Old doors and their frames can change their form because of shifts and you should consider all possible variations. Use the results to figure out what door to choose. When measuring a new door, it is vital to take into consideration inside dimensions of the door frame.

Get Door Height Measurements

It is equally important to measure door height. Use a measuring tape to get vertical measurements from the top to the bottom of the door. When measuring an existing door, take measurements from each side and from the middle part. If the results are different, check whether the door frame or floor isn’t uneven. Precise height measurements will help you to avoid installation problems.

Door Thickness Measurement

Another thing that some people forget to measure is door thickness. This is especially important when replacing the existing door. The new door needs to fit with the frame and all hardware components like hinges and locks. Measure the thickness of the door from one of its faces to another. If you want to get a specialised design, make sure that thickness will meet the manufacturer’s requirements. For example, Wooden flush panel doors will give you a nice modern look, however, getting correct dimensions is crucial for getting a professional result.

Inspect the Door Frame and Opening

One common mistake that people often make is measuring only the existing door and forgetting to inspect the door frame. Prior to purchasing a new door, make sure to check the door frame. Examine whether there is any damage, moisture, warping or other irregularities. Measure the door opening at various points and check whether the door frame is square and level. Pay attention to how the door opens since it also plays a role in choosing hinges and other hardware. Custom wooden external doors will suit those who are interested in customised door solutions.

Write Down Your Measurements

Make sure to record all your measurements immediately, don’t try to remember them. Write down width, height and thickness measurements and record all numbers in one unit, preferably millimeters. Making some photos of the existing door, door frame and the area around the door will be helpful while talking to the manufacturer about your requirements. If you have a distinctive architecture project, you can try Lining board doors in Melbourne.

Get the Door That Suits You with Specialty Doors

Precise measurements are the key to success. Specialty Doors is a custom door manufacturer located in Victoria, Australia. Our company provides custom door solutions for residential projects throughout Australia, including Melbourne, Sydney, Adelaide, Gold Coast and Geelong. Specialty Doors can help you to choose a suitable door for your residential project. With accurate measuring, assessing your door frame and choosing the right manufacturer, you will avoid any installation problems.